Recently, some of our readers have informed us that they have experience with Dataflash file systems.

Embedded File System (EFS) The Embedded File System (EFS) is a proprietary file system used in NOR flash kits. The main features are as follows: The structure of the flash memory is optimized for maximum performance. Mapping information is kept to a minimum, allowing overhead for small numbers.

loading×Sorry, interruptingUpdate
dataflash file system

A flash file system is a bootable system for storing files on flash storage devices. Although flash file systems are closely related to file systems in general, these companies are optimized for the subsequent nature and properties of flash (for example, to avoid write expansion) and for use in specific system operations.


While each device block level can emulate a primary disk, allowing you to use a general purpose file system type on your flash drive, this would be suboptimal for a number of reasons:

  • Block cleanup: Open storage blocks must be explicitly cleared before saving. The time it takes to actually lock the gap,can be significant, so the product is convenient for clearing unused obstructions when the device is idle.
  • Random-Triggered Scan: General purpose filesystems are optimized to avoid disk scans as much as possible, resulting in excessive usage costs. Flash storage doesn’t cause latency for devices.
  • Wear Level: Flash memory devices wear out when the filter is overwritten many times; Flash-based information systems are designed to evenly distribute write operations.
  • What is database filing system?

    DbFS offers a growing set of utilities and methods to make it easy to quickly and securely store this additional information. DbFS backs up data in logically structured computer data and has the ability to place links on the appropriate document tabs as the last of the main application programs used.used by the business/organization.

    Journaled file systems have all the necessary properties of a closed file system.[1] These file systems use JFFS2 and YAFFS.

    Due to the detailed characteristics of flash memory, it is probably best used either with wear-leveling checks, i.e. error correction, or with music flash files created specifically for the system that spread recordings across media and control the duration of the erasure. This is prevented by NAND flash. The basic flash concept behind full systems is that when the flash needs to be updated, the boot system writes a new version of the changed data and a new block, remaps the folder pointers, and then erases the old corner when needed. practice,

    In pen file systems, it is used only for memory devices (MTDs), which are built-in flash memories that do not have a controller. Adobe removable flash cards and USB sticks have built-in controllers available in the market to process MTD with special algorithms,[2][3] such as alignment, bad block recovery, electrical discharge recovery, garbage collection, and error recovery, so the use of the flash reporting system is of limited use.

    Cool gadgets with flash memory are becoming more and more common as the number of mobile devices continues to grow, the cost of memory space decreases, and the size of flash memory chips increases.


    The first flash file feature to operate a flash array as a free-writable disk was M-Systems Israel’s TrueFFS program, which was offered as a software product at the PC Card Expo in Santa Clara, State California, in July 1992 and patented in 1993. [4]

    dataflash file system

    One of the first Flash file methods was Microsoft’s FFS2 to start using MS-DOS, released in the fall of 1992.[5] FFS2 was preceded by a previous course called “FFS”. . However, what at first glance seemed to be a set of flash files and controlled the flash array created more storage space (WORM) than a writable hard drive.

    What are .flash files?

    The flash file system is designed to store files on flash drives. Flash file systems vary in architecture, but most include application programming software, a file system kernel, a shred driver for sector-based file systems, and an MTD (memory technology device).

    About 1994, the PCMCIA industry body approved the Flash Translation Layer (FTL) specification based on M-Systems’ development of TrueFFS. The specification was announced and proposed jointly by M-Systems and SCM Microsystems, who also provided an initial concrete implementation of FTL. Supported by Intel, [6] FTL has become a common design for flash filesystems and has also appeared on non-PCMCIA media.

    Linux Flash File Systems

    How do I create a JFFS2 file system?

    -l or -b Specify little or little endian depending on the processor.-q – Squash initiates permissions and owns everything as root.-n – No valid printing.-e SIZE Clear the block size.-s SIZE – page size.-pSIZE is the fill size of the image.

    JFFS was the first Linux file system designed for Flash, but remember that it was quickly replaced by JFFS2, originally designed for Flash. Then YAFFS came out in 2002, and NAND flash support is proof of that, and JFFS2 was upgraded to support NAND, which was expensive.
    UBIFS was merged into the linux.6.22[7] pair in 2008. Has UBIFS been actively developed since the original merge?[8] UBIFS hosted infradead documentation. org with vehicle operators JFFS2 and MTD. Some initial comparisons of UBIFS with faster compression than F2FS.[9]
    File system log
    LogFS, Linux, another file system for Flash, is currently [updated] in development to address common JFFS2 scalability issues.
    F2FS (Flash-Friendly File System) was added to Linux with the new 3.8 kernel.[10] Instead of talking about high quality directly to raw flash devices, F2FS was designed for storage based flash. devices, most of whichdo not contain a flash translational membrane, such as SD cards[11]

    Merging File Systems

    Overlayfs, unionfs, and aufs are union filesystems that allow you to combine multiple filesystems and present them to the user as a single tree. This allows system designers to classify operating systems that were nominally read-only devices into typical normal read-write ranges on various media. OpenWrt is FTL-free firmware installed on bare chips. It uses overlayfs to integrate read-only compressed SquashFS with JFFS2.

    Translation Layers

    See Also

  • List of Flash recording systems
  • Degree of wear
  • Speed ​​up writing
  • Links

    External Reference

  • Presentation on the many types of flash file systems – September 24, 2007
  • Report on Various Flash File Systems – USENIX Annual Conference, June 2006
  • Файловая система Dataflash
    System Plików Dataflash
    Dataflash Filsystem
    Sistema De Arquivos Dataflash
    Système De Fichiers Dataflash
    데이터 플래시 파일 시스템
    File System Di Dataflash
    Sistema De Archivos Flash De Datos